Alimentatore ad alta tensione da laboratorio ad alta precisione

Input

Voltage

Single-phase 220V±10%

Frequency

50Hz/60Hz

Connection

Input line provided by iDealTek. (1 meter)

Output

Rated power

****W

Output voltage adjusting range

1KV/2KV/3KV/4KV5KV/10KV/20KV/30KV/40KV/50KV/60KV available **

(For other output voltages, please contact us for details)

Output current adjusting range

0A ~ ****mA

Output polarity

Positive or Negative (both available)

Client must choose one output polarity before ordering.

Line regulation

0.1% for ±10% change in input voltage.

Load regulation

0.1% for no load to full load at output.

Ripple (Vr.m.s.)

≤0.1%@ rated output.

Output connection

1.5 meters high-voltage cable & connector provided by IdealTek.

Efficiency

≥85%

Setting & Display

Output control mode

Local

10-turn potentiometer on front panel.

Remote

DB9 analog port & RS485 communication port.

Display mode

Display mode

4¹/₂ LED digital display

Display resolution

≤1% (range: 5%~100% of the rated value)

Protection & Monitoring functions

Load discharging protection

When the load has discharging due to insufficient safety distance between load and ground, the power supply shutdown the high voltage output, and then restarts, so cycle like this till the discharging fault is eliminated.

Short circuit protection

When a short circuit occurs between the load and the ground, the power supply works in constant current mode, the current is limited to the maximum value, and the voltage drops to 0 to protect the internal inverter from damage.

Over current protection

When the users' load exceeds the rated load and cause over-loading, the power supply works in constant current mode, the power supply output current does not change, and output voltage decreases.

Over voltage protection

When the power supply is unloaded, the power supply works in constant voltage mode to prevent power supply from overvoltage damage.

Noise

≤55dB

Protection degree

IP20

Cooling method

Forced air cooling

MTBF

50000 hours @ 25℃

Working environment conditions

Ambient temperature

10℃～40℃

Humidity

10%～90%(non-condensing)

Height

≤2000m

Storage environment conditions

Ambient temperature

-20℃～60℃

Humidity

10%～90%(non-condensing)

Height

≤2000m

Size (W*H*D) (mm)

200*100*300 (≤30W)

500*88*600 (19’’ 2U standard chassis) (>30W)

200*100*300 (≤30w) (nero)

Chassis 2U (> 30W) (RAL7035)

K v

Ma

P (KW)

Modello

1

1000

1

LTP-220VAC- (N/P) 1KW-1KV

2

500

1

LTP-220VAC- (N/P) 1KW-2KV

3

333

1

LTP-220VAC- (N/P) 1KW-3KV

4

250

1

LTP-220VAC- (N/P) 1KW-4KV

5

200

1

LTP-220VAC- (N/P) 1KW-5KV

10

100

1

LTP-220VAC- (N/P) 1KW-10KV

20

50

1

LTP-220VAC- (N/P) 1KW-20KV

30

33.3

1

LTP-220VAC- (N/P) 1KW-30KV

40

25

1

LTP-220VAC- (N/P) 1KW-40KV

Disegni